Loading
Understanding LED indicator status lights and information | Bose Smart Soundbar 300
bose-smart-soundbar-300
Bose Smart Soundbar 300Sold from 2020 - 2024

Understanding LED indicator status lights and information | Bose Smart Soundbar 300

Smart Soundbar LED status

 

Microphone LED (highlighted above on the left):

 StatusInfo
OffMicrophone/voice assistant enabled
RedMicrophone/voice assistant disabled

 

Light bar (highlighted above on the right):

 ColorStatusInfo
WhitePulsingSystem is rebooting
WhitePulsing fastConnecting to a Bluetooth device or to a Wi-Fi network
WhiteSlides to center, pulses twiceRequest confirmed (for system setting change)
WhiteSingle pulseRequest confirmed
WhiteLeft side flashesVolume down command received. If volume button is held, the light stays lit while held
WhiteRight side flashesVolume up command received. If volume button is held, the light stays lit while held
WhiteLeft side glowsAudio muted
WhiteBoth sides glowAudio paused
WhiteSlides to center, glows solid, pulsesThe voice assistant is listening when the light bar slides to the center and glows solid. If no request is made, the light flashes four times and fades, which signals the voice assistant is no longer listening
WhiteSlides to center then to sides, pulses whiteThe voice assistant is listening when the light bar slides to the center and glows solid. After a voice command is received, the light slides from the center to the sides while the assistant thinks, then pulses while the assistant is talking.
WhiteSlides from sides to center continuouslyVoice assistant alarm is sounding
WhiteSlides right to leftDownloading system update
WhiteSlides left to rightUpdating system
BluePulsingReady to connect Bluetooth device
YellowPulsingNotification from voice assistant
AmberFlashes four timesSource error. See Bose app for info
AmberSolidSetup mode / ready to connect to Wi-Fi
RedFlashes four timesVoice assistant and/or internet connection unavailable
GreenPulsingSystem ready for setup or entering Recovery mode
RedSolidSystem error. See Light bar is red for troubleshooting

Acoustimass 300 / Bass Module 700 LED Status Indicator States

The light on the lower rear of the bass module provides power and connection status information.

\"Bass
\"LED

Off

Power-saving mode

\"LED

Amber - Blinking

Ready to pair

\"LED

Amber - Solid, dim

Disconnected from the soundbar or control console

\"LED

White - Solid

Connected to soundbar or control console

\"LED

White - Blinking

Downloading system update

Any other states

Unknown error. Bass module requires service

Virtually Invisible 300 / Surround Speakers wireless receiver LED status:

\"Virtually

Status indicator light

\"Blinking

Amber - Blinking

Ready to pair

\"Solid

Amber - Solid, dim

Disconnected from the soundbar or control console

\"Solid

White - Solid

Connected to soundbar or control console

\"White

White - Blinking

Downloading system update

\"Red

Red - Blinking

Firmware error

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Understanding LED indicator status lights and information | Bose Smart Soundbar 300