Loading
Determining the MAC address | SoundTouch® 20 series III wireless speaker
soundtouch®-20-series-iii-wireless-speaker
SoundTouch® 20 series III wireless speakerSold from 2015 - 2020

Determining the MAC address | SoundTouch® 20 series III wireless speaker

To view the product MAC address:

Note: There are three MAC addresses for your product.
  1. On the top of your product, press and hold the 5 and Volume - buttons: Hold for system information appears on the display and a countdown from 5 begins

    Holding 5 and Volume Down buttons

  • When the countdown completes, release the buttons: MAC Address appears on the system display
  • Press the Volume - button to scroll through the three MAC Addresses:
    1. 1.1 WiFi MAC Address 1: identifies your product on wireless network
    2. 1.2 WiFi MAC Address 1: identifies product when it broadcasts its setup network
    3. 1.3 Ethernet MAC Address: identifies your product on a wired network
  • Press the Power button to exit the menu.

To obtain the MAC address of the system using a tethered USB connection, follow these steps:

This method requires a computer (PC or MAC) and will work on all SoundTouch SM1 and SM2 products. It does not require us to determine the IP address of the system on the network
  1. In the SoundTouch computer app, begin the setup process (Settings > Add or Reconnect System)
  2. When you reach the "Connect to home Wi-Fi network" screen, choose "System Information" to view the system's MAC address



To obtain the MAC address of the system using a tethered USB connection, follow these steps:

This method requires a computer (PC or MAC) and will work on all SoundTouch SM1 and SM2 products. It does not require us to determine the IP address of the system on the network.
  1. Connect a USB cable from your computer to the SoundTouch system
  2. On a desktop/laptop computer, open a browser and go to http://203.0.113.1:8090/info
  3. The following info will be shown:
    1. System Name
    2. System Type
    3. SoundTouch Account Number
    4. Firmware Version
    5. SCM Serial Number
    6. System Serial Number
    7. SoundTouch Controller Information (if connected)
    8. SCM Information (MAC Address, Serial Number)
    9. SMSC Information (MAC Address, Serial Number)

To view the product MAC address in the SoundTouch app:

  1. In the SoundTouch app menu, tap Settings
    Tip: to open the app menu, tap the menu icon ☰ in the upper-left

    Main menu

  • Tap About, then select a system

    Settings menu About screen

    The Speaker Details screen shows info for the selected system.

    Speaker details screen

Was this helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Need Help?
Need further assistance? We’re here to help.
Loading
Determining the MAC address | SoundTouch® 20 series III wireless speaker