Determining the IP address | SoundTouch® 30 Series II Wi-Fi® Music System

Use one of these methods to determine the system IP address:

Select Menu > Settings > About
Select the desired system and copy the IP address from the System Info screen

Power on the system
On top of the system, simultaneously press and hold 5 and Volume – until Hold for system information appears on the display

Wait until the countdown from 5 ends on the display and the system menu appears
Repeatedly press Volume – until 2.3 IP Address appears, which shows the IP address

Run Terminal (Mac) or Command Prompt (Windows) on a computer connected to the same network as the system
Enter the command arp –a to display a list of IP addresses on the network and their associated MAC addresses
Identify the system by its MAC address, then copy the IP address associated with it. If two IP addresses appear, copy bot
Tip: While there is no set format for a Bose MAC address, some common addresses begin with 00-0C-8A or 08-DF-1F (series I), 08-DF-1F (series II), D0-39-72, 5C-31-3E, 6C-EC-EB, or 54-4A-16 (series III)

Log in to the router settings menu
Navigate to the IP address table
Identify the system by its MAC address, then copy the IP address associated with it. If two IP addresses appear, copy both
Tip: While there is no set format for a Bose MAC address, some common addresses begin with 00-0C-8A or 08-DF-1F (series I), 08-DF-1F (series II), D0-39-72, 5C-31-3E, 6C-EC-EB, or 54-4A-16 (series III)

Was this helpful?