Loading
STSB300-SOUNDBAR | ADAPTiQ audio calibration process does not detect headset - ka08c000001pXjDAAU
soundtouch®-300-soundbar
SoundTouch 300 Soundbar - US/CanadaSold from 2016 - 2020

STSB300-SOUNDBAR | ADAPTiQ audio calibration process does not detect headset - ka08c000001pXjDAAU

Be sure the ADAPTiQ headset is connected properly.

The system will detect if the headset is connected to the appropriate jacks. Remove and reseat the headset connectors to the Bose system.

Be sure you are at least one arm length away from the nearest speaker.

Move to another listening location that is greater that one arm length from the nearest speaker.

Disconnect the HDMI OUT TO TV jack while running the ADAPTiQ audio calibration.

Some HDMI cables could prevent the ADAPTiQ headset from connecting properly to your product. If the HDMI OUT TO TV jack is connected, temporarily disconnect it while running the audio calibration.

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
STSB300-SOUNDBAR | ADAPTiQ audio calibration process does not detect headset - ka08c000001pXjDAAU