Loading
Determining the MAC address | SoundTouch® 300 soundbar
soundtouch®-300-soundbar
SoundTouch® 300 soundbarVendu entre 2016 - 2020

Determining the MAC address | SoundTouch® 300 soundbar

To obtain the MAC address of the system using a tethered USB connection, follow these steps:

This method requires a computer (PC or MAC) and will work on all SoundTouch SM1 and SM2 products. It does not require us to determine the IP address of the system on the network
  1. In the SoundTouch computer app, begin the setup process (Settings > Add or Reconnect System)
  2. When you reach the "Connect to home Wi-Fi network" screen, choose "System Information" to view the system's MAC address



To obtain the MAC address of the system using a tethered USB connection, follow these steps:

This method requires a computer (PC or MAC) and will work on all SoundTouch SM1 and SM2 products. It does not require us to determine the IP address of the system on the network.
  1. Connect a USB cable from your computer to the SoundTouch system
  2. On a desktop/laptop computer, open a browser and go to http://203.0.113.1:8090/info
  3. The following info will be shown:
    1. System Name
    2. System Type
    3. SoundTouch Account Number
    4. Firmware Version
    5. SCM Serial Number
    6. System Serial Number
    7. SoundTouch Controller Information (if connected)
    8. SCM Information (MAC Address, Serial Number)
    9. SMSC Information (MAC Address, Serial Number)

Pour afficher l’adresse MAC du produit dans l’appli SoundTouch:

  1. Dans le menu de l’appli SoundTouch, touchez Réglages
    Astuce : pour ouvrir le menu de l’appli, touchez l’icône de menu ☰ dans le coin supérieur gauche

    \"Main

  • Touchez « À propos», puis sélectionnez un système

    \"Settings \"About

    L’écran Détails du haut-parleur affiche les informations du système sélectionné.

    \"Speaker

To find the MAC addresses of a newer SoundTouch system when its not connected to a network, follow these steps:

  1. Place the system in setup mode and connect a device to the Bose setup network.
  2. On the speaker's button pad, press and hold 2 and Volume – until the Wi-Fi indicator glows amber.
  3. Open the SoundTouch app on the connected device and go to Menu > Settings > Speaker Settings and select the system.
  4. Select CONNECT TO A WI-FI NETWORK and find the Bose setup network.
  5. Determine the IP address using a method below:

    1. Retrieve network info or run ipconfig/ifconfig from a computer.
    2. Click on the “i” icon in iOS settings.
    3. Once connected in Android, click on the network name. An Android device will show the phone or tablet’s IP address, so the router address will be the same first three octets, the fourth octet will need to be changed to .1

    • Once the system’s IP address has been determined, open a web browser and point it at [IP address]:8090/info
    • The page that loads will contain both MAC addresses for the system.

    Cette information est-elle utile?

    OUI
    NON
    COMMENCER LA RÉPARATION OU LE REMPLACEMENT
    Besoin d’aide?
    Vous avez besoin d’aide supplémentaire? Nous sommes ici pour vous aider.
    Chargement
    Determining the MAC address | SoundTouch® 300 soundbar