Was this article helpful?
Setting up your product | Sub2 Powered Bass Module
Setting up your bass module:
Note: The USB port on your system is only used for system updates.
Connecting a L1 Pro32 system
- Connect a SubMatch cable from the L1 Pro system power stand to the SUBMATCH IN port on your bass module. This provides both power and audio to your bass module
- Set the LINE IN EQ to L1
Connecting all other systems
- Connect a power cord from the POWER jack on your bass module to a working power outlet
- Connect the 1/4\" (6.4mm) or XLR output of your mixer or audio source to the LINE IN 1 jack. Or, for stereo outputs, connect to both the LINE IN 1 and LINE IN 2 jacks
- Set the LINE IN EQ to LPF