Loading
Playing audio files on a connected USB drive | T4S ToneMatch® mixer
t4s-tonematch®-mixer
T4S ToneMatch® mixerSold from 2018

Playing audio files on a connected USB drive | T4S ToneMatch® mixer

To connect and play audio from USB flash drive:

  1. With the mixer on, rotate the ToneMatch knob to PREFS
  2. On the back of the mixer, connect the USB flash drive (with MP3 or WAV files) to the USB AUDIO jack: The display briefly shows USB Media Attached
  3. Use the Menu knob (the knob on the left below the display) to scroll to USB A Playback, then push the knob to select it and view the available files on the drive
    Note: The menu disappears after 10 seconds of inactivity
  4. Use the Select knob (the knob in the center below the display) to scroll to a track, then push the knob to play it
    • To adjust the volume of the track, rotate the Level knob (the knob on the right below the display)
    • To pause playback, push the Select knob
    • To mute playback, push the Level knob

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Playing audio files on a connected USB drive | T4S ToneMatch® mixer