Loading
Assigning inputs to the Aux output | T8S ToneMatch® mixer
t8s-tonematch®-mixer
T8S ToneMatch® mixerSold from 2018

Assigning inputs to the Aux output | T8S ToneMatch® mixer

Assign inputs to the Aux output by following these steps:

  1. Select Aux with the T1 rotary selector
  2. Rotate the Level button to adjust the signal level of the selected channel
  3. Rotate the Tap button to scroll through the tap menu and highlight the desired tap point
  4. Press the Select button to select the tap point, or press the Cancel button to exit with no change. The name of the currently selected tap point appears in bold type
Note: To mute the Aux output, press the Level button. Press it again to unmute.
Loading
Assigning inputs to the Aux output | T8S ToneMatch® mixer