Loading
VideoWave II | Enabling or disabling Auto-off mode
videowave®-ii-entertainment-system---46''
VideoWave® II entertainment system - 46"Sold from 2012 - 2013

VideoWave II | Enabling or disabling Auto-off mode

Changing the Automatic Off setting:

Your system automatically powers off if there is no interaction for either 4 or 24 hours. To select a timeframe:
  1. Touch the click pad to activate the control frame.
  2. Select "OPTIONS" on the lower right side of the control frame to display the menu.
  3. Scroll Down to Automatic Off
  4. Scroll left or right to enable (power off after 4 hours) or disable (power off after 24 hours) the setting
  5. Press the Exit button to exit the menu.
*Note: This setting responds differently on older software versions:
  • Versions 01.08.02 – 01.09.06: Depending on the Automatic Off setting, your system turns off after 4 or 24 hours (see above). However, regardless of this setting, if there is no video and audio from a connected video device or if there is no audio from a connected audio device for 15 minutes, the source is shut down
  • Versions 01.04.00 – 01.08.02: When the Automatic Off setting is disabled, your system will never power off
  • Versions 01.03.06 or earlier: There is no Automatic Off setting. Your system powers off after 24 hours without interaction
Loading
VideoWave II | Enabling or disabling Auto-off mode