VideoWave II | Programmation de la télécommande

Use the remote code lookup tool to find a compatible code for the device.

The Remote Code Lookup Tool allows for users to search for a compatible device code based on the device type, brand and model number entered. Use this tool to lookup compatible device codes only. Only submit devices that are not listed in the tool when you are unable to find a compatible code for them

Note: Codes listed are only for newest remote code version.

Pour programmer votre télécommande :

Power on your system
Sur cette console, appuyez sur le bouton Configuration
Sur la télécommande, faites défiler l'écran jusqu' à [Source] SETUP, puis appuyez sur le bouton OK
Sélectionnez un mode de programmation :
- Si vous avez la télécommande fournie avec le périphérique que vous tentez de contrôler, faites défiler jus qu'à configurer la télécommande, puis appuyez sur le bouton OK
- Si vous n'avez pas la télécommande fournie avec l'appareil que vous tentez de contrôler, faites défiler jus qu'à entrée manuelle de code à distance, puis appuyez sur le bouton OK (Remarque : Remarque : Lorsqu'on vous le demande, vous devez sélectionner une marque et un code.)
Suivez les instructions à l'écran pour terminer la programmation.

Control console built-in IR emitter and receiver location.

The system's control console houses four IR emitters positioned at various angles behind the plastic panel to the left of the button panel cover. An IR receiver is also located in the same area. The plastic panel does not impede with the IR signals passing to and from this location

Third party control information for installers.

We can assist with the set up and use of the Bose system but not with the programming or the operation of any third party devices. Installers can be provided with the following information:

Five items are needed in order to control a Lifestyle without using the Bose remote:

A home Wi-Fi network
An Android or iOS smartphone or tablet
The MyURemote app (~US$40)
The Global Cache iTach IP2SL TCP/IP to Serial (RS232) Controller. (~US$100 on Amazon) This unit is not wireless, though a Wi-Fi enabled version is available
A serial data cable with a female DE9 connector to male 3.5mm TRS connector (~US$13)

The iTach controller will need to be connected to power, to the home network via Ethernet and to the Lifestyle console Serial Data connection using the serial data cable. The MyURemote app will need to be configured to connect to the network and operate the main room of the Lifestyle system. Bose link expansion rooms can also be controlled (room codes apply).

The iTach controller is compatible with Lifestyle systems using any of the following consoles: