Was this article helpful?
Understanding LED indicator status lights and information | VideoWave® II entertainment system - 46''
System Status Indicators
| Console LED | AV Monitor LED | Description | Related Information |
|---|---|---|---|
| Off | Off | No Power | Product will not turn on |
| Red | Red | System is off (Standby) | |
| Blinking Green* | Blinking Green* | System is starting up -or- System Information Screen is up | System continuously reboots |
| Green | Off | System is on | |
| Blinking Red (5 on, 1 off)** | Red | Remote batteries are low | |
| Blinking Amber (5 on, 1 off)** | Red | Unify has not completed | Connecting other devices to your system |
| Blinking Amber (5 on, 1 off) | Red | System is off and device has been removed from the console | |
| Red | Alternating Green/Red | Thermal shutdown has occurred*** | |
| Blinking Green or Solid Green | Blinking Red | No Power to AV Monitor | |
| Green | Green | Video Mute enabled | Adjusting Video Mute |
| Amber | Red | System powering down -or- System off and charging iPod | The LED will be amber for about 15 seconds while the system powers down |
| Blinking Red (5 on, 1 off) | Red | Unify process complete but no available devices connected | |
| Green | Red | A/V monitor cable needs reseating or control console requires update | Updating the software or firmware of your product |
*Note: If this state persists indefinitely during boot then there may be a console failure
**Note: Occurs for a 30 seconds after system turned off (standby)
***Note: This LED pattern will persist even after the conditions that led to the thermal shutdown have changed
.png)
