Was this helpful?
Resetting your product | Wave® SoundTouch® music system
Do you want to reset your product or restore its default settings?
- Reset: A reset corrects minor processors errors. Unless indicated otherwise, product settings are not lost during a reset.
- Restore factory settings: This resets your product to its factory default configuration. Unless indicated otherwise, all settings are cleared and reverted to their original out-of-box state. After, your product can be configured as if it were being setup for the first time.
Reset your system.
To reset your system, disconnect the power cord for 30 seconds. If there is a CD in the system, it will automatically eject when power is reconnected.
To reset the SoundTouch pedestal:
Note: Your SoundTouch settings are not lost during a reset.
- On the back of the SoundTouch pedestal, press and hold the Control button for about 10 seconds until the Wi-Fi light turns off
- Wait while the pedestal reboots and reconnects to your network. Once reconnected, the light is solid white.
To restore the factory default settings:
Note: This reset erases all settings and returns your product to its default out-of-box state.
- Power off your product
- On the remote, press and hold the Alarm Setup button until -SETUP MENU- is displayed
- Press the Tune > button repeatedly until RESET ALL is displayed
- Press the Time + button to select YES
- While PRESS 3 TO CONFIRM appears on the system display, press the 3 button.
To restore the factory default settings of the SoundTouch pedestal:
Note: This reset erases all settings and returns your product to its default out-of-box state. Once reset, open the SoundTouch app to reconfigure your product.
- On the back of the Wave system, check that the Bose link connection is secure
- If connected, disconnect the Ethernet cable from the pedestal
- On the back of the Wave system, disconnect the power cord
- On the back of the pedestal, press and hold the Control button and, while holding it, reconnect the power cord to the Wave system
- When the light on the pedestal begins blinking white (about five seconds), release the Control button
- Wait until the light on the adapter is solid amber. (Note: While resetting, the light will change colors and blink patterns for up to 4 minutes)
- If previously connected, reconnect the Ethernet cable
.png)
