Loading
Clearing the product memory of paired Bluetooth devices | Wave® music system
wave®-music-system
Wave® music systemSold from 2004 - 2012

Clearing the product memory of paired Bluetooth devices | Wave® music system

Clear the adapter memory of previously-connected Bluetooth® devices.

Using the Wave Bluetooth Music Adapter:
  1. Power on your system and select the Bluetooth source.
  2. On the remote control, press and hold the 6 button for about 10 seconds until a tone is heard.
Once the memory is cleared, the adapter enters Discoverable mode and is ready to connect a new device.

Using the SoundLink adapter for Mac or PC:
  1. Power on your system and select the SoundLink source.
  2. On the remote control, press and hold the 6 button for 10 seconds until a descending tone is heard.
    Tip: You might hear other tones while holding the button. Wait 10 seconds until a descending tone is heard, then release the button.
Once the memory is cleared, the adapter reconnects with the SoundLink USB key.
Loading
Clearing the product memory of paired Bluetooth devices | Wave® music system