Loading
ADAPTiQ system setup and deactivation | SoundTouch® 300 soundbar
soundtouch®-300-soundbar
SoundTouch® 300 soundbarSold from 2016 - 2020

ADAPTiQ system setup and deactivation | SoundTouch® 300 soundbar

To turn on ADAPTiQ, run the audio calibration:

Before you begin, be sure the soundbar and any accessory bass module surround speakers are connected and placed where you want them.
  1. On the back of the soundbar, connect the ADAPTiQ headset to the ADAPTiQ jack.
  2. Place the headset on your head.
  3. On the remote control, press the SoundTouch button.
  4. Press and hold the 8 button until the TV and Bluetooth® lights on the soundbar glow green.
    To choose a different language, use the up and down arrow buttons. To return to the default language, press and hold the 8 button for 10 seconds.
  5. Follow the voice prompts to calibrate your system.
  6. When complete, unplug the headset from the soundbar and store it in a safe place for future use.

To turn off ADAPTiQ, restore the default system settings:

To turn off the ADAPTiQ audio calibration, restore the default settings of your system. For more info, see Resetting your product.
Loading
ADAPTiQ system setup and deactivation | SoundTouch® 300 soundbar