Was this helpful?
Poor sound quality from product | T4S ToneMatch® mixer
Determine if the problem is specifically related to bass performance.
If there is too little bass, see Too little bass or too much treble from product.
If there is too much bass, see Too much bass or too little treble from product.
Make sure you select the correct ToneMatch preset.
An incorrect preset can affect sound quality. If there is no exact preset for the microphone or instrument, try something similar or set the control to Flat. For more info, go here and click the link under ToneMatch mixer presets and scenes.
Be sure no unwanted processessing is applied.
Disable any unwanted reverb, delay, compression, gating, EQ Effects (zEQ and Parametric EQ) or other effects. Then, listen for changes in sound quality.
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more information, see Resetting your product.
Plug in a different audio source.
Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.
Replace the input cables.
Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.
.png)
