Loading
Putting a system into Setup mode | Wave® SoundTouch® music system
wave®-soundtouch®-music-system
WAVE SOUNDTOUCH MUSIC SYSTEMSold from 2013 - 2015

Putting a system into Setup mode | Wave® SoundTouch® music system

Enter Setup mode.

If a Bose app or instructions ask you to put your system in Setup mode:
  1. Press and hold the Control button on the back of the pedestal for about 3 seconds
  2. Wait until the Wi-Fi light glows solid amber and the system display shows SETUP SEE INSTRUCTIONS, then relase the button
    Tip: Holding the button for 10 seconds will reboot the pedestal. So, if the light does not glow amber within a few seconds, release it and try again
  3. For next steps, refer to the Bose app or instructions that asked you to enter Setup mode.

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Putting a system into Setup mode | Wave® SoundTouch® music system