Loading
Putting a system into Setup mode | Wave® SoundTouch® music system
wave®-soundtouch®-music-system
Wave® SoundTouch® music systemSold from 2013 - 2015

Putting a system into Setup mode | Wave® SoundTouch® music system

Enter Setup mode.

If a Bose app or instructions ask you to put your system in Setup mode:
  1. Press and hold the Control button on the back of the pedestal for about 3 seconds
  2. Wait until the Wi-Fi light glows solid amber and the system display shows SETUP SEE INSTRUCTIONS, then relase the button
    Tip: Holding the button for 10 seconds will reboot the pedestal. So, if the light does not glow amber within a few seconds, release it and try again
  3. For next steps, refer to the Bose app or instructions that asked you to enter Setup mode.
Loading
Putting a system into Setup mode | Wave® SoundTouch® music system